A car alarm can be a nuisance to your neighbors and the last thing you want is some random person breaking into your car. Thankfully, there are ways how to disable car alarm permanently. The most popular method is to disconnect the battery. This will render the car inoperable as it requires power to run.
A buzzing alarm is not only annoying to others, it is also very embarrassing for you, especially when youāre in a public place. Deactivating a car alarm can be complex when thereās no logical reason behind this. But in this article, weāre showing you how you can easily disable your Viper car alarm that randomly goes off following a few steps.
Reasons Behind A Car Alarmš Going Off
There might be several issues that are causing your car alarm to go off frequently if it is not a burglary. Here are some very common reasons behind this:
- Sensitive or misplaced key fob;
- Broken shock sensor;
- Unclean hood latch sensor;
- Incorrectly installed alarm;
- A low-charged or dead car battery;
- Rusty battery points;
- Bad connection to the control unit.
Disable Viper Car Alarm Permanently
If you need to override the alarm for a certain period of time, you need to enter āvalet mode.ā It disables all alarm features of your car except for the keyless remote start feature to start the car. If your viper car alarm goes off randomly, you can follow these two ways to disable it.
Method 1: When The Remote Is Broken Or Lost
If you have a broken remote or lost it, do not worry. This system has a backup to your problem. Hence, you should follow this method to disarm your alarm.
- Enter your car using the regular car key even if the alarm goes off.
- Once you got into your car identify the valet switch.
- Then put the ignition key into the keyhole and turn it to the on or run position to start the car. Then turn it back off immediately.
- Quick tap the valet switch once. Donāt hold it. The system is in valet mode now.
- To exit the mode, just repeat the process.
The alarm should stop within a second or two. Then you can start the car as well.
If this process does not work it is possible that your viper car alarm is programmed to need more than one press in the valet switch. Follow this-
- Turn the ignition key off, and then turn it on again.
- Give the valet switch two quick taps this time
This may or may not work. If this time it didnāt work out, try the same method with three, four, and up to five taps in the valet switch as the override feature can be programmed up to that limit to work. You have to turn the ignition key on and off but not close the car door every time to make it work.
Method 2: Only Available On Newer System
- Open the driverās door.šŖ
- Press the āLockā button, immediately the āUnlockā button, then again the āLockā button. šLockā”šUnlockā”šLock.
- The LED will indicate the car is in valet mode by š„lighting up solid.
- To exit the mode, just repeat the process.
If neither of the systems is available, contact any local authorized dealer for solving the problem.
If you donāt know how the valet switch looks, or where it is placed, look into the attached file. It is a black, small switch. And generally, you may get them on the windshield, or the bottom or side dash of the driverās seat. You may also ask the installer to be sure if it really seems impossible to find.
Here are some other common reasons and solutions to them that you may use to deactivate a car alarm.
Reason And Solution 1: Turn Off The Panic Button
The key fob is a great convenience to lock and unlock car doors. Except for the mentioned features it also includes a panic button that is an emergency alert system that sets off only when you press it. This orange or red button is found in most key fobs.
The function of the button is to make a similar sound to the car alarm; honking, and flashing lights. When kept in the pocket or bag, any sudden movement may cause the alarm to go off. The sound keeps going on for a certain period or until you press the āpanic’ button. It may also shut off by starting and driving the car.
Use a key wallet to keep your keys organized and prevents unusual occurrences
Reason and Solution 2: Replace The Broken Key Fob
If the reason behind the frequent car alarm is a broken key fob, then replace it immediately. In addition to turning off the car alarm, it is also possible to know how the battery charge is not wested or the charge is increased. You can verify the problem by changing the battery or resetting the key fob.
Permanent vs Temporary Car Alarm Disabling
In the world of car alarms, there are two main types of disablement: permanent and temporary. Permanent disablement is when the alarm is physically removed from the vehicle or its wiring is cut. Temporary disablement is when the alarm is deactivated for a set period of time, typically by using a key fob or a code. So, which is better?
What Do Car Alarms Do?
Car alarms are security devices that help protect your vehicle from theft. They are designed to go off when someone tries to break into your car.
Car alarms have been around since the early 1900s and they have evolved over time as technology has improved. Today, there are many different types of car alarm systems and technologies on the market.
Car alarms can be broken down into two categories: passive and active. Passive car alarms use a variety of methods to deter potential thieves such as the sound of an alarm or a flashing light in order to scare them away without actually harming them. Active car alarms use an alarm system that is triggered by some form of intrusion such as a break-in or even someone just trying to open the door handle.
Turn your car alarm off without remote?
Having a car alarm with a remote is a hassle-free solution for those times when you need to leave your car, but don’t forget to lock your doors. The remote is designed to open and close the doors, lock and unlock the car.
Final Thought About Car Alarm
We hope that you have found the solution to disable your viper car alarm. Following these steps accordingly can solve the issue. Nonetheless, take help from the professional if itās still buzzing off.
when you or a loved one is the victim of car theft, a properly installed car alarm is one of the easiest and most effective ways to help prevent another theft. The devices send signals to a nearby police or emergency services to warn them of the theft. Without the alarm, thieves can easily steal your car, and they often take other valuables, too.
[…] action. Even, you can put out this issue without using any heavy instrument. if you ever need to turn off the car alarm š again, you know […]
[…] The Best Way To How To Disable Car Alarm Permanently? […]